Operation Manual
ROB R1000
Work area Work days per week Work hours per day Suggested time time interval
100 m
2
5 3 07:00 - 10:00
7 2 07:00 - 09:00
200 m
2
5 5.5 07:00 - 12:30
7 4 07:00 - 11:00
400 m
2
5 11.5 07:00 - 18:30
7 8 07:00 - 15:00
600 m
2
6 14 07:00 - 21:00
7 12 07:00 - 19:00
800 m
2
7 16 07:00 - 23:00
1000 m
2
7 20 05:00 - 01:00
3.13.2 To set the timer
•
Work hours 1:
To set start and stop times for
Work
hours 1
, enter each required time in hours and
minutes and press
OK
to confirm the entered time.
•
Work hours 2:
To set start and stop times for
Work
hours 2
, enter each required time in hours and
minutes and press
OK
to confirm the entered time.
•
Work days:
To select the days the robotic
lawnmower must work, tick off the days the robotic
lawnmower will work
•
Reset timer:
To reset values to the factory settings,
select the
Reset timer
and press
OK
.
To inactivate
Work hours 1
or
Work hours 2
, enter the
time 00:00 - 00:00 to reset the timer to --:-- - --:--.
A clock symbol is displayed on the start page when the
timer settings are set. The clock symbol is black when
the robotic lawnmower is not allowed to mow due to a
timer setting.
3.14 Installation - ROB R800, ROB R1000
INSTALLATION
Remote start 1
Remote start 2
Test settings
Drive past wire
The following operating settings are available via this
selection in the main menu.
•
Remote start 1:
To control the robotic lawnmower so
that it can easier reach remote parts of the garden.
•
Remote start 2:
To control the robotic lawnmower so
that it can easier reach remote parts of the garden.
•
Test settings:
To check the above settings.
•
Drive past wire:
To set the distance over the
boundary wire that the robotic lawnmower should
travel before turning back.
For examples of garden settings, see
Yard layout
examples on page 30
.
3.14.1 Remote start 1
One important function with the guide wire is the
possibility to steer the robotic lawnmower to remote
garden areas when required. This function is very useful
in gardens where, for instance, the front and back are
joined by a narrow passage.
Remote start 1 Proportion
Distance
3.14.1.1 Proportion
With this function activated, (any option other than
Never
is selected) the robotic lawnmower will at times
follow the guide wire from the charging station to the
remote area and begin mowing there.
How often the robotic lawnmower must follow the guide
wire from the charging station is selected as a proportion
of the total number of times it leaves the charging
station. At all other times, the robotic lawnmower leaves
the charging station in the standard manner and starts to
mow.
Proportion Never
Rarely
Medium
Often
Always
• The following five options can be selected;
-
Never
(0%)
-
Rarely
(approx. 20%)
-
Medium
(approx. 50%)
358 - 001 - 21.09.2017 Installation - 23