User Guide

h. Insert the tubing (Q) into the upper compres-

sion fitting (U) and tighten the fitting to 31 ft•lb

(42 N•m).

g. Position the tubing (Q) next to the compression

fitting (K) and, using a pencil, mark the tubing

(Q) for proper insertion into the compression

fitting (K).

Remove the tubing (Q), and, using the tube

cutter, cut the tubing to its proper length.

i. Using two (2) pipe wrenches, rotate the upper

tee (P) counterclockwise and the lower tee (J)

clockwise.

j. Place the compression nut (R) and the compres-

sion ring (S) over the bottom of the tubing (Q).