Data Sheet

Datasheet

iM980A

iM980A_Datasheet_mcf88.docx, v1.2 Page 14

6. Module Interface Characteristics

6.1 Programming Interface

For programming the module with special firmware versions, there are two

types of interfaces supported: A SWD-interface, which require a special

programmer, as well as a bootloader-interface, for updating the modules

firmware via UART-interface.

Note: The module offers some IOs that are connected to the JTAG On-chip

Debug system. Currently this interface is unavailable

Currently there is a silicon limitation for the MCU of the module. For more information please

see: http://www.st.com/resource/en/errata_sheet/dm00097022.pdf (ES0224, V7.0, chapter

2.1.2)