Data Sheet

Datasheet
iM980A
iM980A_Datasheet_mcf88.docx, v1.2 Page 23
FCC Class B Digital Device Notice
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Labelling Requirements for Host Device
The host device shall be properly labelled to identify the modules within the
host device. The certification label of the module shall be clearly visible at all
times when installed in the host device, otherwise the host device must be
labelled to display the FCC ID of the module, preceded by the words "Contains
transmitter module", or the word "Contains", or similar wording expressing the
same meaning, as follows:
Contains FCC ID: 2AWAL409810