Instruction Manual

Important - Please read these instructions fully before starting assembly
10 Customer Helpline 0333 300 1614
Safety Information
Operational and Maintenance Safety (Continued)
• Do not use the tool if any parts are damaged or
defective. Have any damaged or defective parts
repaired or replaced by an authorized service agent.
Never attempt any repairs yourself.
• Grip the tool securely. Always hold the tool securely in
both hands while working with it.
• Keep handle dry, clean and free from oil and grease.
Slippery handles do not allow for safe handling and
control of the tool in unexpected situations.
• Keep the cable away from the cutting area. During
operation, the cable may be hidden in shrubs and can
be accidentally cut by the saw chains.
• Do not overload the tool. Only work in the performance
range stated. Do not use tools that do not have
any use other than that intended by the manufacturer.
• Do not operate a chainsaw while climbing in a tree.
Operation of a chainsaw while up in a tree may result in
personal injury.
• Always keep proper footing and operate the chainsaw
surface. Slippery or unstable surfaces such as ladders
may cause a loss of balance or control of the chainsaw.
• When cutting a limb that is under tension, be alert for
released, the spring loaded limb may strike the operator
and/or throw the chainsaw out of control.
• Use extreme caution when cutting brush and saplings.