ORIGINAL INSTRUCTION MANUAL 400/500/600W Hedge Trimmer 7543144/7438912/7648166 (Model: MEH4045/MEH5051/MEH6060) Important - Please read these instructions fully before starting assembly These instructions contain important information that will help you get the best from your hedge trimmer, ensuring it is assembled correctly and safely.
Contents Safety information ………………………………………………………..............................…....…………........3 In the box ……………………………………………………………….......................................……………....11 Assemble…………………………………………………………………...................................…………….. 12 Prepare…………………………………………………………………...................................…………....….. . 12 Operate......................................................................................................................................................
Safety information Important - Please read these instructions fully before starting assembly Warning symbols The following warning symbols appear throughout this assembly manual and indicate the appropriate safety measures you should take when assembling and operating the hedge trimmer. This symbol indicates there is a danger of serious personal injury or death if you do not observe the warning.
Safety information Important - Please read these instructions fully before starting assembly Personal safety WARNING! Only operate the hedge trimmer if you are wearing the correct Personal Protective Equipment (PPE) as described in the following warnings. Warning symbols The following warning symbols appear throughout this assembly manual and indicate the appropriate safety measures you should take when assembling and operating the hedge trimmer.
Safety information Important - Please read these instructions fully before starting assembly General power tool safety warnings WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mainsoperated (corded) power tool or battery-operated (cordless) power tool.
Safety information Important - Please read these instructions fully before starting assembly General power tool safety warnings d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. e) When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Safety information Important - Please read these instructions fully before starting assembly General power tool safety warnings e) D o not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
Safety information Important - Please read these instructions fully before starting assembly General power tool safety warnings f) K eep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed.
Safety information Important - Please read these instructions fully before starting assembly Hedge trimmer safety warnings 1. Keep all parts of the body away from the cutter blade. Do not remove cut material or hold material to be cut when blades are moving. Make sure the switch is off when clearing jammed material. A moment of inattention while operating the hedge trimmer may result in serious personal injury. 2. Carry the hedge trimmer by the handle with the cutter blade stopped.
Safety information Important - Please read these instructions fully before starting assembly Maintenance and storage 1) Never use water to cleaning the unit. 2) Always clean the hedge trimmer immediately after use. Brush the blade using a stiff nylon brush to remove any debris. 3) Always store the unit in a dry place. 4) Inspect the hedge trimmer before each use. 5) Have the unit professionally repaired if any damage occurs.
In the box Parts 1 Blade 5 On/off switch 2 Safety guard 6 Cable strain relief 3 Front handle with safety switch 7 Blade sheath 4 8 Instruction manual Rear handle 1 2 3 4 5 6 7 8 Customer helpline 0345 605 2065 11
Assemble Assembling instructions The hedge trimmer has been already assembled, You needn’t to assemble. Prepare Preparing instructions Always take care when removing the packaging to prevent damage to you or to the hedge trimmer. IMPORTANT! Before assembling the hedge trimmer, check all the parts indicated in the manual are in the box. Inspect all the parts for signs of damage. Do not assemble the hedge trimmer if you observe any damaged components.
Prepare Preparing instructions WARNING! Before using the tool, read the instruction book carefully. INTENDED USE The product is intended for trimming hedges, bushes and shrubs. Observe the technical data for the maximum cutting capacity. Do not cut branches exceeding the stated maximum capacity. This product is intended for private domestic use only, not for any commercial trade use. It must not be used for any purposes other than those described.
Operate Operating instructions 1. STARTING AND STOPPING BEFORE STARTING YOUR HEDGE TRIMMER Remove blade sheath as illustrated in Fig B. B TO START YOUR HEDGE TRIMMER Depress the safety switch on front handle with one hand and the on/off switch on the rear handle with the other hand to turn on the hedge trimmer. The trimmer will be staying on as long as the two switches are depressed. (See Fig C) TO STOP YOUR HEDGE TRIMMER Move Hedge trimmer away from cutting area before stopping.
Operate Operating instructions 2. PAY ATTENTION TO USE YOUR HEDGE TRIMMER Inspect the area to be cut before each use, remove objects which can be thrown or become entangled in the cutting blades. Always hold the hedge trimmer with both hands and with the blade away from you before turning it on. Always keep the power cord behind the Hedge trimmer when in use. Do not place it over the hedge that you are trimming where it may be cut by the blade.
Maintenance Maintenance WARNING: If the supply cord is damaged, it must be replaced by the same cord provided by the manufacturer. Also replacement of cord has to be done by the manufacturer, or its service agent or similarly qualified persons in order to avoid a hazard. CLEANING Disconnect from electrical outlet. Using a soft brush-remove debris from all air intakes and cutting blade. Wipe over surface of your Hedge trimmer with a dry cloth. WARNING! Never use water for cleaning your Hedge trimmer.
Technical data Technical data table Model MEH4045 Rated Voltage Rated Power 400W Rated no-load speed Machine Weight MEH6060 500W 600W 1800 /min Cutting width Cutting length MEH5051 230-240 V ~ 50 Hz 16 mm 450 mm 510 mm 600 mm 2.2kg 2.5kg 2.7kg Protection degree /II Noise and technical date MEH4045 A weighted sound pressure LpA = 87dB(A) KpA=3 dB (A) A weighted sound power LwA = 94.
Technical data Noise and technical date Using the correct accessory for the tool and ensuring it is sharp and in good condition. The tightness of the grip on the handles and if any anti vibration accessories are used. And the tool is being used as intended by its design and these instructions.
Troubleshooting General troubleshooting The following chart lists problem symptoms, possible causes and corrective action, if your electric hedge trimmer does not operate properly. If these do not identify and correct the problem, contact your service agent. WARNING! Always switch the product off, disconnect it from power supply and let the product cool down before performing inspection, maintenance and cleaning work! Problem Possible Cause Solution Hedge trimmer does not operate 1.1 No power 1.
Getting help Customer helpline 0345 605 2065 Guarantee Dear Customer, In the unlikely event that your device develops a fault, please contact our Customer service department on the telephone number shown below. 1. These guarantee terms cover additional guarantee rights and do not affect your statutory warranty rights. Claims must be accompanied by Proof of Purchase.
