IMPORTANT THIS ENVELOPE CONTAINS YOUR INSTRUCTIONS AND WARRANTY Please read carefully before operating your equipment KEEP FOR FUTURE REFERENCE WARRANTY NOT VALID UNLESS ENCLOSED CARD MAILED WITHIN ONE WEEK TO MciNTOSH LABORATORY mtlntnshLaboratory, Inc. 2 CHAMBERS STREET Phone 3-5491 BINGHAMTON, N. Y. EXPORT DIVISION: 25 WARREN ST., NEW YORK, N. Y.
INSTRUCTION MANUAL MciNTOSH MODEL Me-3D 3D WATT POWER AMPLIFIER Type A-116B MciNTOSH LABORATORY, INC. 2 Chambers St. Binghamton, N. Y. U.S.A.
DESCRIPTION The McIntosh Model Mc-30 is a 30 watt high fidelity power amplifier designed for home entertainment systems and professional applications. The Model Mc-30 is similar to the earlier McIntosh Model A-116 30 watt amplifiers and includes all of the rigid electrical specifications and features found in these earlier units plus: less than 0.3% harmonic distortion at any power output up to 30 watts and at any frequency in the audio spectrum, 20 to 20,000 cps; less than 0.
the octal "Pre-Amp input" receptacle. In this case connect the input lead to pin #5 and the ground lead to pin # 1. When using this connection the source must not have a DC 6utput component. Output Connections The Mc-30 has output impedances of 4, 8 and 16 ohms available at either the screw terminal connector or the output socket. In addition, a 600 ohm output (balanced to ground) is available at the output socket. See schematic diagram for socket connections.
Power Output 30 watts continuous Input Level Input # 1 (pin jack and screw terminals and pin 5 of pre amp socket) .5 volts to 30 volts, with gain control Input #2 (pin 2 of pre amp socket) 2.5 volts, (For use with McIntosh preamplifier equipment). Frequency Range 20 to 30, 000 cycles + . 1 db at 30 watts output 15 to 50,000 cycles + .5 db at 30 watts output 10 to 100,000 cycles ~ 1 db at 15 watts output Harmonic Distortion Less than 1/3% at 30 watts output or less, 20 to 20,000 cycles.
Auxiliary Equipment connection ("Pre-Amp input" receptacle) Designed to power C -8 and other Mclntosh Pre-Amplifiers Size 13" x 8" x 8" high, chassis type construction Weight 30.5 pounds net Finish Chrome and Black GUARANTEE We guarantee the performance of this equipment and the mechanical and electrical workmanship to be free of serious defects for a period of 90 days. This guarantee does not extend to components damaged by improper use nor does it extend to transportation to and from the factory.
Tube 12AU7 12BH7 12AX7 1614 5U4 Pin No. DC Volts No Signal DC Volts 30Wout 1 2 3&8 4&5 6 7 9 240 120 129 Filament 240 96 Filament 210 102 108 (6. 3V AC to pin 9) 210 86 10 1.5 .5 40K* 380K* 18K 10 0 40K* 2.5K* 1 2 3&8 4&5 6 7 9 352 0 18 Filament 352 0 Filament 295 0 15.5 (6. 3V AC to pin 9) 295 0 132 10 .4 12.2K* 220K 1.2K 132 10 12.2K* 220K 1 2 3 4&5 6 7 8 9 440 -42 -42 Filament 440 -42 -42 Filament 375 -41 -42 (6.
PRE-AMP. INPUT OUTPUT TO FIL. NOTE I output Connections Using Octal Socket 4 ohms 8 ohms - pins pins and 2 and 3 16 ohms - pins and 4 600 ohms - pins 7 and 8 (pin 6 is CT and ground) 70.7 volts - pins 5 and 6 (pin 6 is ground) Pre-Amplifier Input M-150B Socket Connections Pin 1 _ ground Pin 2 - pre-amp input (2. 5V) Pin 3 - not used Pin 4 - +310V at 3.5 rna, Pin 5 - .5v input Pin 6 - not used Pins 7 and 8 - 6.3V at 1 amp.
marrant, Mcintosh Laboratory warrants the electrical and mechanical workmanship and components of this equipment to be free of serious defects for 'a period of 90 days provided the enclosed warranty card is duly completed and returned to Mcintosh Laboratory. Mcintosh Laboratory further warrants the transformers supplied as components of this equipment to be free of manufacturing defects for a period of 1 year from the date of shipment from the factory.
INSTRUCTION MANUAL MciNTOSH MODEL Me·30 30 WATT POWER AMPLIFIER Type A-116B Serial # 15329 and Over i MciNTOSH LABORATORY, INC· 2 Chambers St. Binghamton, N. Y. U.S.A. 1.
DESCRIPTION The McIntosh Model MC-30 is a 30 watt high fidelity power amplifier designed for home entertainment systems and professional applications.
If desired, the signal source may be wired to an octal plug for insertion in the octal "Pre-Amp input" receptacle. In this case connect the input lead to pin #5 and the ground lead to pin # 1. When using this connection the source must not have a DC output component. Output Connections The MC-30 has output impedances of 4, 8 and 16 ohms available at either the screw terminal connector or the output socket. In addition, a 600 ohm output (balanced to ground) is available at the output socket.
GUARANTEE We guarantee the performance of this equipment and the mechanical and electrical workmanship to be free of serious defects for a period of 90 days. This guarantee does not extend to components damaged by improper use nor does it extend to transportation to and from the factory. SERVICE INFORMATION All Mcintosh equipment IS designed for long trouble free operation. All components are of highest quality and are conservatively operated.
Tube Pin No. DC Volts No Signal 12AX7 1 2 3 4&5 6 7 8 9 440 -42 -42 Filament 440 -42 -42 Filament 1 2 3 4 5 6 7 8 -GFilament 440 440 -42 1614 5U4 1 2 3 4 5 6 7 8 DC Volts 30Wout 375 -41 -42 (6.3V AC to pin 9) 375 -41 -42 -G- (6.3V AC to pin 7) 375 375 -42 Filament .8 5.5 Filament 460 Filament 410 AC Volts SOW out 98 132 132 98 132 132 -f}- 98 98 132 205* l.lM 150K 205* l.lM 150K -G- 205* 205* 150K 98 19 8.8 (ripple) 0* 370 44 370 44 (5.0V AC to pin 2) U. S. Patents No.
PRE-AMP. INPUT OUTPUT .5V INPUT TO FIL. NOTE I output Connections Using Octal Socket 4 ohms - pins and 2 8 ohms - pins 1 and 3 16 ohms - pins 1 and 4 600 ohms - pins 7 and 8 (pin 6 is CT and ground) 70.7 Volts - pins 5 and 6 (pin 6 is ground) Pre-Amplifier Input Socket Connections M-150B Pin 1 - ground Pin 2 - pre-amp input (2.5V) Pin 3 - not used Pin 4 - +3l0V at 3.5 lOa. Pin 5 - .5v input Pin 6 - not used Pins 7 and 8 - 6.3V at 1 amp.
