McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 www.mcintoshlabs.
Thank you from all of us at McIntosh Table of Contents With the AS901/AS125 Amplifier Stand, you have invested in a premium accessory that will provide you with many years of enjoyment. Please take a few moments to familiarize yourself with the features and instructions to get the most from your equipment. If you need further technical assistance, please contact your dealer who may be more familiar with your particular setup including other brands.
AS901 Dimensions Front View 3.000” 4.051” 7.6cm 10.3cm 2.407” 6.1cm 13.300” 33.7cm Side View 5.943 15.1cm 19.160” 48.7cm 29.813” 75.7cm Rear View POWER CONTROL IN OUT AS901 AMPLIFIER STAND McINTOSH LABORATORY, INC., BINGHAMTON, NY MADE IN USA 17.813 45.
AS125 Dimensions Front View 3.000” 4.051” 7 .6cm 10.3c m 2.782” 7.1cm 12.250” 3 1 .1 cm Side View 4.034” 13.979” 35.5cm 10.2c m Rear View 18.013” 45.7cm 17.813” 4 5 .
Power Control (Logo Backlight) Note: Your Amplifier Stand logo backlight can illuminate when your audio equipment powers on. To do this, connect a cable to the Power Control port in the rear of the stand using the cable and connector described here. Power Control and Trigger Connectors The Power Control Trigger Output Jacks sends and receives Power On/Off Signals Main, Trig 1&2 (+12 volt/0 volt) when connected to and Pass-Thru other McIntosh Components.
Packing Your Amplifier Stands In the event it is necessary to repack the equipment for shipment, the equipment must be packed exactly as shown. Failure to do so will result in shipping damage. Use the original shipping carton and interior parts only if they are all in good, serviceable condition. If a shipping carton or any of the interior part(s) are needed, please call or write to the Customer Service Department of McIntosh Laboratories. Please see the Part List for the correct part numbers.
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, NY 13903 www.mcintoshlabs.com The continuous improvement of its products is the policy of McIntosh Laboratory Incorporated who reserve the right to improve design without notice. Printed in the U.S.A. McIntosh Part No.
