Owner's Manual

6
Power Control (Logo Backlight)
Note: Your Amplifier Stand logo backlight can illumi-
nate when your audio equipment powers on. To
do this, connect a cable to the Power Control
port in the rear of the stand using the cable and
connector described here.
Power Control and Trigger Connectors
The Power Control Trigger Output Jacks sends and
receives Power On/Off Signals
(+12 volt/0 volt) when connected to
other McIntosh Components. An
additional connection is for control-
ling the illumination of the Power
Output Meters on McIntosh Power
Amplifiers. A 3.5mm stereo mini
phone plug is used for connection to the Power Con-
trol, Trigger and Passthru Outputs.
Power
Control
Meter
Illumination
Control
Ground
Main, Trig 1&2
and Pass-Thru
AS901 Specications
Stand Material
Ash Wood
Overall Dimensions
Width is 17.813 inches (45.2cm)
Height is 4.051 inches (10.3cm)
Depth is 29.813 inches (75.7cm)
Weight
41.6 pounds (18.9Kg) net, 51.1 pounds (23.2Kg) in
shipping carton
Shipping Carton Dimensions
Width is 23.812 inches (60.5cm)
Depth is 38.312 inches (97.3cm)
Height is 9.5 inches (24.1cm)
AS125 Specications
Stand Material
Ash Wood
Overall Dimensions
Width is 17.813 inches (45.2cm)
Height is 4.051 inches (10.3cm)
Depth is 18.013 inches (45.7cm)
Weight
27.1 pounds (12.3Kg) net, 35.1 pounds (15.9Kg) in
shipping carton
Shipping Carton Dimensions
Width is 23.812 inches (60.5cm)
Depth is 28.188 inches (71.6cm)
Height is 9.5 inches (24.1cm)