Owner`s manual

10
McIntosh Power Amplifier
(Right Channel)
McIntosh Power Amplifier
(Left Channel)
How to Connect the C100P with Unbalanced
Connectors
How to Connect the C100P with
Unbalanced Connectors
1. Connect Unbalanced cables from the LISTEN MAIN
OUTPUTS to unbalanced power amplifier inputs.
2. Connect cables from the C100 LISTEN PROCESSOR
FROM jacks to the outputs of a signal processor. Con-
nect cables from the C100 LISTEN PROCESSOR TO
jacks to the signal processor inputs.
3. Connect cables from the C100 RECORD PROCESSOR
FROM jacks to the outputs of a signal processor. Con-
nect cables from the C100 RECORD PROCESSOR
TO jacks to the signal processor inputs.
5. Connect cables from RECORD TAPE 2 OUTPUTS to
high level record inputs of the tape recorder.
6. Connect cables from the outputs of a DVD Audio Player
to the AUX 2 inputs.
7. Connect cables from the outputs of Tuner to the
TUNER inputs.
8. Connect cables from a record player or turntable with a
low output moving coil phono cartridge to the PH
1(MC) inputs.
9. Connect the ground wire from a record player or turn-
table to either of the GND terminals.
NOTE: Balanced and Unbalanced Inputs and Outputs can be
mixed. For example, you may connect signal sources to
Unbalanced Inputs and feed signals out from the
Balanced Outputs. You can also use Balanced and
Unbalanced outputs simultaneously, connected to
different power amplifiers.
Power Amplifier
Top View
insert
Turntable
McIntosh CD Player
McIntosh Tuner
In Out
Tape Recorder
InOut
Record Signal
Processor
DVD Audio Player
InOut
Listen Signal
Processor