Owner`s manual

18
Specifications
Specifications
Frequency Response
+0, -0.5dB from 10Hz to 40,000Hz
Total Harmonic Distortion
0.002% from 10Hz to 40,000Hz
Signal To Noise Ratio
Phono, 86dB
High Level, 100dB
Maximum Voltage Output
12V RMS Unbalanced, 25V RMS Balanced
Output Impedance
50 ohms, Balanced and Unbalanced
Sensitivity
Phono MM, 4.4mV for 2.5V rated output (1mV IHF)
Phono MC, 100uV for 2.5V rated output
High Level, 450mV for 2.5V rated output
Input Impedance
Phono MC, 10 ohms
Phono MM, 47K ohms, 65pF
High Level, 22K Unbalanced, 44K Balanced
Maximum Input Signal
Phono MM, 50mV
High Level, 5V Unbalanced, 5V Balanced
Power Requirements
100 Volts, 50/60Hz at 30 watts.
110 Volts, 50/60Hz at 30 watts.
120 Volts, 50/60Hz at 30 watts.
220 Volts, 50/60Hz at 30 watts.
230 Volts, 50/60Hz at 30 watts.
240 Volts, 50/60Hz at 30 watts.
NOTE: Refer to the rear panel of the C100C for the correct
voltage
Dimensions
17-1/2 (44.5cm) W, 5-3/8 (13.7cm) H, 17-1/2 (44.5cm)
D, (Both Enclosures, including clearance for connectors)