Owner`s manual

6
C100C Rear Panel Connections
C100C Rear Panel Connections
Connect the C100C
power cord to a live AC
outlet. Refer to informa-
tion on the back panel
of your C100C to deter-
mine the correct voltage
for your unit.
SWITCHED AC outlets
turn on when the C100
turns on and are used to
supply AC power to ac-
cessory components.
UNSWITCHED AC
outlet stays on at all
times when the C100
power cord is con-
nected to a live AC
outlet.
Main Fuse
holder, refer to
infromation on
the back panel of
your C100C to
determine the
correct fuse size
and rating.
The EXT (external)
Sensor jack allows you
to connect a McIntosh
Keypad or IR sensor
for remote operation.
DATA PORTs send signals to
compatible source components
to allow you to control them
with HR100 remote control.
SUM DATA PORT
send remote signals
to a McIntosh RCT
Translator.
AMPLIFIER POWER
CONTROL Outputs send
turn-on signal to a McIn-
tosh Power Amplifier when
the C100C is turned on.
AMPLIFIER POWER CON-
TROL Outputs send turn-on
signal to a McIntosh Power
Amplifier when the C100C
Front Panel Spk/Amp 1 and/
or 2 is on.
TO C100P Connector
accepts a DB25, 25
conductor cable that
connects all control
signals and power sup-
ply voltages from the
C100C to the C100P.