Owner`s manual

15
16. Connect Cables from the Turntable (with a Moving
Magnet Cartridge) to the C1000 Tube Preamplifier Un-
balanced MM (8) LEFT and RIGHT INPUTS.
Note: If the Turntable has a Moving Coil Cartridge,
connect the cables to the MC (9) Inputs.
17. Connect the Turntable Ground Cable to the GND bind-
ing post located between the C1000 Tube Preamplifier
MM (8) LEFT and RIGHT INPUTS.
18. Connect Cables from the External Sound Processor Left
and Right Inputs to the C1000 Tube Preamplifier PRO-
CESSOR TO LEFT and RIGHT Output Jacks.
19. Connect Cables from the External Sound Processor Left
and Right Outputs to the C1000 Tube Preamplifier
PROCESSOR FROM LEFT and RIGHT Input Jacks.
20. Connect Cables from the Music Server Left and Right
Outputs to the C1000 Tube Preamplifier Unbalanced
SRVR (4) LEFT and RIGHT INPUTS Jacks.
21. Connect Cables from the Music Server Left and Right
Inputs to the C1000 Tube Preamplifier Unbalanced
SRVR (4) LEFT and RIGHT OUTPUTS Jacks.
22. Connect XLR Cables from the C1000 Tube Preampli-
fier MAIN LEFT and RIGHT Balanced OUTPUTS, to
one of the Balanced Inputs on the Left and Right McIn-
tosh Power Amplifiers.
Note: If the C1000 is part of a Multichannel Audio
System, proceed to page 19 at this time.
23. Connect the supplied AC Power Cord between C1000C
AC Power Cord Socket and a live AC outlet. Refer to
figure B.
24. Proceed to page 23 for customizing the SETUP Fea-
tures of the C1000 Tube Preamplifier.
How to connect the C1000C and C1000T
Connect
Figure B
Figure A