Owner`s manual

34
Remote Control Push-Buttons
Selects one of the seven
High Level Audio/Video
Sources or Phono Input
Turns AC Power ON or OFF to
certain McIntosh Components
when connected via the Data Port
Adjusts the volume
level up or down
Selects Disc Player, Mu-
sic Server or Tape Re-
corder Functions and also
performs various func-
tions on a variety of
McIntosh Components
Press to Power the
C1000 ON or OFF
Use to select tuner pre-
sets, disc tracks or any
numbered operation
Selects Switched Output
2, FM Tuner Operating
Functions and Track Se-
lection on certain McIn-
tosh CD Players
Mutes the audio
Note: Push-buttons whose function is not indentified
above are for use with other McIntosh Products.
Press MODE to switch between
Stereo or Mono Modes
Selects Switched Output 1,
AM Tuner Operating Func-
tions and Disc Selection on
certain McIntosh CD Players
Selects On Screen Func-
tions for McIntosh DVD
Players and certain CD
Players
Press TRIM and then
the LEVEL Push-but-
tons to select and ad-
just various functions
Selects the FF (Fast For-
ward) or REWind Mode
on a Disc Player, Music
Server or Tape Recorder;
tunes Up or Down the
AM/FM Dial
Selects Functions for McIntosh
Home Controller and as a “shift”
key when used with the AM or FM
push-buttons to select Output 1 or 2
Press +10 to Review Tuner
Station Presets and select
certain functions on McIn-
tosh CD Players
LED illuminates during
the time a remote com-
mand is sent to the C1000
Press to Power ON
the C1000
Press to Power OFF
the C1000
Switches OFF the entire
C1000 System except in
Passthru Mode
Scrolls through the
available C1000 Inputs
and the McIntosh
MDA1000 Digital
Sources when connected
to the D/A Input
1
Press to listen to the se-
lected Record out signal
1
Requires a Data Cable Connection between the C1000C and the MDA1000