Rear Panel Connection

C1100T Rear Panel Connections
3B
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: [phone] FAX: [phone]
GND terminals accept
a ground wire from a
turntable
RIGHT OUTPUT
REC/FIXED sends
signals to the input
of a recording device
MM (Right and Left
channels) accept signals
from a Moving Magnet
Phono Cartridge
RIGHT OUTPUT MAIN
(Unbalanced) sends sig-
nals to a Power Amplifier
RIGHT OUTPUT 1 and 2 Bal-
anced send signals to Power
Amplifier(s) and are switched On/
Off using a trim setting with the
Front Panel Controls or Remote
Control Push-Buttons
RIGHT BALANCED INPUTS
1 thru 6 accept high level
program source signals
RIGHT UNBALANCED
INPUTS 1 thru 4 ac-
cept high level program
source signals
MC (Right and Left channels)
accepts signals from a Moving
Coil Phono Cartridge
LEFT UNBALANCED
INPUTS 1 thru 4 ac-
cept high level program
source signals
LEFT BALANCED INPUTS
1 thru 6 accept high level pro-
gram source signals
LEFT OUTPUT 1 and 2 Bal-
anced send signals to Power
Amplifier(s) and are switched
On/Off using a trim setting
with the Front Panel Controls or
Remote Control Push-Buttons
LEFT OUTPUT MAIN (Un-
balanced) sends signals to a
Power Amplifier
LEFT OUTPUT
REC/FIXED sends
signals to the input
of a recording device
RIGHT INPUT Connector accepts the custom
McIntosh 23-Conductor Cable. This cable con-
nects to the C1100 CONTROLLER OUTPUT.
It supplies the control signals and power sup-
ply voltages for the Right Channel Circuitry in
the Preamplifier
LEFT INPUT Connector accepts the custom
McIntosh 23-Conductor Cable. This cable con-
nects to the C1100 CONTROLLER OUTPUT.
It supplies the control signals and power sup-
ply voltages for the Left Channel Circuitry in
the Preamplifier