Owner`s manual

10
Front Panel Displays, Controls, Switches and Jack
IR Sensor receives
commands from a
Remote Control
POWER Switch,
switches the C22
ON or STAND/
BY(Off )
VOLUME Control
adjusts the listening level
for both channels
Connection for low
impedance dynamic
headphones with 1/4”
(6.3mm) stereo phone
type plug, for private
listening
INPUT SELECTOR Control
selects the desired audio signals
for listening and recording
TONE BYPASS when
activated the audio
signal bypasses the Tone
Controls
REC MONITOR
allows listening
to the playback of
RECORD Source
while the recording
is in process
OUTPUTS 1 and 2 switches allow
the C22 to switch Power Control
and Audio to two separate Power
Amplifiers
MODE SELECTOR allows
for listening to various
channel combinations from
Stereo to Mono
BASS Control pro-
vides 10dB boost
or cut with a center
flat position
TREBLE Control
provides 10dB
boost or cut with a
center flat position
BALANCE Control
allows the adjustment
of the relative volume
balance between chan-
nels
Indicates when the
C22 is connected to
an active AC Outlet
LOUDNESS switch provides frequency
response contoured to compensate
for the sensitivity of the human ear at
softer listening levels
PHONO LOAD MM PF provides
seven different capacitive loads
for a Moving Magnet Phono
Cartridge
PHONO LOAD MC OHMS
provides seven different
resistive loads for a Moving
Coil Phono Cartridge