Owner`s manual

7
Connect the C22 power cord
to a live AC outlet. Refer
to information on the back
panel of your C22 to deter-
mine the correct voltage for
your unit
MAIN POWER CONTROL
Output sends a turn-on
signal to a McIntosh Com-
ponent when the C22 is
turned on
DATA PORTS send signals to
McIntosh Source Components
to allow control with the C22
Remote Control
D/A and CD INPUTS
(Balanced) accept high
level program source
signals
GND terminals accept
a ground wire from a
turntable
RECORD OUT
sends signals to
the input of a
recording device
Main Fuse holder, refer
to information on the
back panel of your C22 to
determine the correct fuse
size and rating
PHONO MM accepts
signals from a Moving
Magnet phono cartridge
SUM DATA PORT
sends data signals
from all the Data
Ports to McIntosh
Components for
control
RECORD, AUX, DVD, D/A,
CD, and TUNER, INPUTS
accept high level program
source signals
OUTPUTS 1 (Balanced) send
signals to a Power Amplifier
and is controlled by the C22
Front Panel OUT 1 Switch
OUTput 1 and OUTput 2 send
Turn-On signals to McIntosh
components and are controlled
by the C22 Front Panel OUT 1
and OUT 2 Switches
OUTPUTS 1 and 2 send
signals to Power Amplifi-
ers and are switched On/
Off with the Front Panel
OUT 1 and 2 Switches
PHONO MC accepts
signals from a Moving
Coil phono cartridge
Rear Panel Connections