Owner`s manual

How to use the Remote Control

The supplied Remote Control is capable of directly

controlling the functions of contemporary McIntosh

Source Components connected to the C22 Tube Pre-

amplifier.

Power

To Switch the C22 On or Off press the appropriate

Power Push-button on the Remote Control.

Note: During the Tube Warm Up time (when first

switched ON), the Front Panel INPUT and MODE

SELECTOR LEDs will flash and the Audio Outputs

will be muted.

Input Source Selection

Press the INPUT Upp or Downq Push-button to

select the desired program source.

Disc, Server and Tape Functions

Use the Play, <Stop, :Next, 9Back and ;Pause

Push-buttons to operate a DVD Player, CD Player, CD

Changer, Music Server or Tape Recorder.

Notes: 1. For Remote Control Operation of a Source

Component using the C22 Remote Control, a

connection is required between the appropri-

ate C22 Data Port and the Source Component

Data Port. Refer to pages 4 and 8 for additional

information.

2. Refer to the Source Component’s Owner’s

Manual for specific operating information.

Volume

Press the Upp or Downq VOLume Push-button to

raise or lower the listening volume level.

Note: The Record Signals present at RECORDER OUT-

PUTS are not affected by volume changes.

Press to Power

the C22 ON

Selects Disc Player,

Music Server or Tape

Recorder Functions and

also performs various

functions on a variety of

McIntosh Components

Adjusts the volume

level up or down

Scrolls through the

available C22 Inputs

Note: Push-buttons whose function is not identified above are for use with other McIntosh Products.

Press to Power

the C22 OFF