Owner`s manual

How to Connect for a Second Room

1. Connect Audio Cables from the C46 Balanced OUT-

PUTS 2 to the Second Power Amplifier Balanced In-

puts.

Notes: The unbalanced Audio OUTPUTS 2 and

unbalanced Power Amplifier Inputs may be used

instead of the Balanced Connections. When a

second room is connected, it is sometimes

desirable to switch Off the Loudspeakers in the

Main Listening Room. This can be accomplished

by connecting the Main Power Amplifier to the

C46 OUTPUTS 1 instead of the MAIN OUTPUTS,

so they can be switched Off by the Front Panel

OUTPUTS 1 Push-button.

2. Connect a Control Cable from the C46 POWER CON-

TROL 2 Jack to the Power Control In of a McIntosh

Right

Loudspeaker

4 ohms

Left

Loudspeaker

4 ohms

McIntosh Power Amplifier

Keypad

Power Amplifier.

3. Connect a RG6 or RG59U coaxial cable from the

EXTernal SENSOR Jack to a Keypad.

Note: A Wall Mounted IR Sensor may also be used in place

of the Keypad.