Owner`s manual

18
Power On and Off
The Red LED above the STANDBY/ON Push-button
lights to indicate the C48 is in Standby mode. To
switch ON the C48, press the STANDBY/ON Push-
button on the Front Panel or the (Power On)
Push-button on the Remote Control. The C48 will go
through a brief startup initialization with the Front
Panel Information Display indicating the last used
source and volume setting, this is followed by the
volume setting indication starting at zero and then
increasing to the last used volume setting. Refer to
figures 50, 51, 52 and 53. To switch OFF the C48 press
the STANDBY/ON Push-button on the Front Panel or
the OFF Push-button on the Remote Control.
Note: For an explanation of the Remote Control
Push-button functions, refer to pages 10 and 11.
Source Selection
Rotate the INPUT Control to select the desired source
or press the appropriate push-button on the Remote
Control. Refer to figures 50 and 53.
Volume Control
Rotate the Front Panel VOLUME Control or use the
VOLUME Upp or Downq Push-buttons on the Re-
mote Control for the desired listening level. Refer to
figures 50 and 53.
Trim Functions
The C48 has seven different Trim Selections with
Adjustments. The Trim Selections include Balance,
Trim Level, Amplifier Meter Backlight, Equalizer
Mode, Mono/Stereo Mode, Digital Audio Display Info
and Phono Cartridge Loading. The Trim Settings are
stored in memory indepen-
dently for each Input Source
Selected, except the Ampli-
fier Illumination and Digital
Audio Display settings of On or
Off, which are the same for all
inputs.
Note: Selection and Adjustment
of all Trim Functions may
be performed using the
Front Panel TRIM, OUT-
PUT 1/ OUTPUT 2 / ◄
MENU ► Push-buttons
together with the VOL-
UME/ADJUST Control.
The Remote Control TRIM
Push-Button together with
the LEVEL + / - Push-
button may also be
used. Refer to figures 50
and 53.
BALANCE
Listening balance varies with
different program sources,
room acoustics and listening
positions relative to the Loud-
speakers. Use the Balance
(Trim Function) as needed to
achieve approximately equal
listening volume levels in each
Loudspeaker. To adjust the Bal-
How to Operate the C48
Figure 50
Figure 51
SOURCE: CD1
15%
Figure 52
SOURCE: SERVER
30%
Figure 53
Figure 54
BALANCE: 0 dB
||