Owner`s manual

McIntosh Keypad

1. Connect a McIntosh Multi-Channel Amplifier with a

DB25 computer type cable from the CR16 Multi-Chan-

nel Amp connector to amplifier input connector.

Note: Both audio and zone power control pass through this

cable. Discrete zone audio cables may also be used,

either balanced or unbalanced. Refer to page 4 for the

DIN plug balanced terminal connections. Also connect a

cable from the CR16 DIN Multi-Channel Amp connector

to the matching connector on the amplifier to provide

zone power control.

2. Connect a WK-3/WK-4 keypad, using 4 conductor

shielded cable to a zone terminal connector.

Note: A WK-2 keypad or R649 Wall Sensor connected to the

Zone Sensor Connector with RG6 or RG59U coax cable

may also be used.

3. Connect the video outputs of A/V source components

to the CR16 video inputs and the CR16 video outputs

to the matching MX132 video inputs.

4. Connect the Audio Outputs from A/V source compo-

nents to the matching MX132 Inputs.

5. For a dedicated Zone Source Component, connect the

Audio/Video Outputs and the Data Port Input to the

CR16 Zone Aux In connectors.

6. Connect the Video Out To Mon to the Video input of a

remote zone TV or monitor.

7. Connect a DB37 cable from the CR16 Controller Input

B Connector to the To Multizone Controller Connector

on a McIntosh MX132.

8. Connect a Power Control cable from the CR16

POWER CTL (Control) jack to the Power Control In

of a McIntosh Tuner.

9. Connect a Power Control cable from the McIntosh

Tuner Power Control Out Jack to the Power Control In

of a McIntosh DVD Player and then onto the next

McIntosh Source Component.

10. Connect a Data cable from the CR16 DVD DATA

PORT to the DATA IN of a McIntosh DVD Player.

11. Connect the CR16 power cord to a live AC outlet.

How to Connect the CR16 with a MX132

Monitor/TV

McIntosh Eight Channel Amplifier