Installation Guide HT-12 Home Theater Subwoofer HT-12 McIntosh Laboratory, Inc.
Features, Installation Features Installation Locating The Subwoofer The optimal method for selecting speaker locations includes the use of a real time spectrum analyzer (RTA) operated by an experienced system installer. Refer to figure 1. An uncompromising installation would take into consideration the floor, wall and ceiling coverings, the type and placement of furniture and can even include the architectural design of the room and its construction materials.
How to Connect How to Connect The McIntosh HT-12 Home Theater Subwoofer utilizes binding posts for speaker wire connections. Refer to figure 2. 1. Connect a loudspeaker cable from the red and black loudspeaker binding posts to the appropriate terminals on the rear of the Power Amplifier. Note: For additional connection information, refer to the Power Amplifier Owners Manual. 2. Tighten all of the loudspeaker and amplifier binding posts.
Please Take A Moment The serial number, purchase date and McIntosh dealer name are important to you for possible insurance claim or future service. The spaces below have been provided for you to record that information: Serial Number: Purchase Date: Dealer Name: Technical Assistance If at any time you have questions about your McIntosh product, contact your McIntosh dealer who is familiar with your McIntosh equipment and any other brands that may be part of your system.