Owner's Manual

24
The MA/MAC6700 can be part of a Multichannel
Sound System for SACD, DVD-Audio and Home
Theater. The Right and Left Front Channels from an
Audio/Video Control Center or Surround Decoder
can “Passthru” the Preamplifier Circuitry of the MA/
MAC6700, and then on to the Power Amplifier Cir-
cuitry of the MA/MAC6700. The Setup Mode allows
the activation of the Passthru Mode and the selection
of the specified MA/MAC6700 Input Source. In the
example below, the Right and Left Front Channels
from the Audio/Video Control Center will be con-
QHFWHGWRWKH65956HUYHU,QSXW-DFNVRQWKH0$
MAC6700. Refer to page 13 for additional connection
information.
Notes: 1. The Phono Input Connectors and Digital Input
Connectors are not assignable as a Passthru
Input.
2. If the Balanced Input Connectors are already
reassigned to a given Input, they will not
appear in the list of available Inputs for the
Passthru Mode.
3. When one of the RCA Inputs is selected as a
Passthru Input, it is advisable to remove it
from the list of available Inputs by switching
it Off. Refer to “Source Inputs Reassignment”
starting on page 22.
1. Press and hold the INPUT CONTROL until the
Front Panel Display indicates the Setup Mode is
active. Then rotate the INPUT CONTROL and
select the Setup Menu item “SETUP: PASSTHRU,
Source: OFF”. Refer to figure 15.
2. Rotate the VOLUME Control until “SETUP:
PASSTHRU, Source: SRVR<RCA> appears on the
Front Panel Alphanumeric Display. Refer to figure
16.
3. To exit from the Setup Mode, press the INPUT
CONTROL and the Front Panel Display will revert
back to its normal display.
3. To exit from the Setup Mode, press the INPUT
CONTROL and the Front Panel Display will revert
back to its normal display.
EXAMPLE TWO:
This example will use selection of the Tuner FM Input
to switch the Trigger 1 Output On.
4. Press and hold the INPUT CONTROL until the
Front Panel Display indicates the Setup Mode is
active. Then rotate the INPUT CONTROL until
the Setup Menu item “SETUP: TRIG1 OUTPUT,
Action: MAIN” appears on the Front Panel Dis-
play. Refer to figure 17.
5. Rotate the VOLUME Control until “SETUP:
TRIG1 OUTPUT, Action: SOURCE” appears.
Refer to figure 20.
6. Rotate the INPUT Control until the first Source
Input Menu item “SETUP: TRIG1 OUTPUT,
Source: _ _ _ _ _ _ _ _ OFF” appears on the Front
Panel Display. Refer to figure 21.
Notes: 1. By default all the Source Inputs are set to
Off.
2. Any combination of Source Inputs from
one to all may be assigned to either Trig-
ger (1 or 2) or both Triggers.
Figure 20
SETUP: TRIG1 OUTPUT
Action: SOURCE
Power Control Triggers 1 and 2
By default the Power Control TRIGger 1 and TRIGger
2 Outputs function the same as the MAIN Power Con-
trol Jack, switching On/Off with the MA/MAC6700.
Trigger 1 and 2 are also reassignable to activate when
the ACC ON/OFF Push-buttons on the Remote Con-
WURODUHXVHGZKHQDJLYHQ,QSXWRU,QSXWVLVVHOHFWHG
RUZKHQWKH)URQW3DQHORU5HPRWH&RQWURO287-
PUT 1 or OUTPUT 2 Push-buttons are pressed.
EXAMPLE ONE:
The Power Control Trigger 1 Output will be set to
function via the Remote Control ACC Push-buttons.
1. Press and hold the INPUT CONTROL until the
Front Panel Display indicates the Setup Mode is
active. Then rotate the INPUT CONTROL until
the Setup Menu item “SETUP: TRIG1 OUTPUT,
Action: MAIN” appears on the Front Panel Dis-
play. Refer to figure 17.
2. Rotate the VOLUME Control until “SETUP:
TRIG1 OUTPUT, Action: REMOTE” appears.
Refer to figure 18.
Figure 17
SETUP: TRIG1 OUTPUT
Action: MAIN
Figure 18
SETUP: TRIG1 OUTPUT
Action: REMOTE
SETUP: PASSTHRU
Source: SRVR<RCA>
Figure 16
SETUP: PASSTHRU
Source: OFF
Figure 15
Passthru
Figure 21
SETUP: TRIG1 OUTPUT
Source: AUX OFF