Owner's Manual

29
Setup, con’t
The TM3 Tuner is capable of receiving AM/FM
Broadcasts in various parts of the world. In some
countries the broadcasters use slightly different stan-
dards and the TM3 accommodates these differences.
The Tuner Region Default Setting is for the USA.
To change the TM3 for the broadcast standards in
your country follow the steps below for changing the
receiving standards:
Note: Changing the current Tuner Region will result in
clearing of all the Station Presets.
1. Press and hold the INPUT CONTROL until the
Front Panel Display indicates the Setup Mode is
active. Then rotate the INPUT CONTROL until
the Setup Menu item “SETUP: TUNER, Region:
USA” is indicated. Refer to figure TM3-8.
2. Rotate the VOLUME Control to select the correct
Region. Refer to figures TM3-6 thru TM3-9.
TM3 Tuner Regions
Setting $0%DQG )0%DQG FM Spacing
USA 530kHz - 1710kHz 87.9MHz - 107.9MHz 200kHz
JAPAN 522kHz - 1611kHz 76MHz - 90MHz 100kHz
EUR 100 522kHz - 1602kHz 87.5MHz - 108MHz 100kHz
EUR 50 522kHz - 1602kHz 87.5MHz - 108MHz 50kHz
Note: For additional information contact your
McIntosh Dealer.
3. To exit from the Setup Mode, press the INPUT
CONTROL and the Front Panel Display will
revert back to its normal display.
Figure TM3-6
SETUP: TUNER
Region: USA
Figure TM3-7
SETUP: TUNER
Region: JAPAN
Figure TM3-8
SETUP: TUNER
Region: EUR100
Figure TM3-9
SETUP: TUNER
Region: EUR50