Owner's Manual

30
Source Selection
Rotate the INPUT Control to select the desired source
or press the appropriate push-button on the Remote
Control. Refer to figures 50 and 53.
Volume Control
Rotate the Front Panel VOLUME Control or use the
VOLUME UpS or DownT Push-buttons on the Re-
mote Control for the desired listening level. Refer to
figures 50 and 53.
Trim Functions
The MA/MAC6700 has various Trim Selections with
Adjustments. Refer to the following chart for the avail-
able Trim Selections. The Trim Settings are stored in
memory independently for each Input Source Select-
Power On and Off
The Red LED above the STANDBY/ON Push-button
lights to indicate the MA/MAC6700 is in Standby
mode. To switch ON the MA/MAC6700, Press the
STANDBY/ON Push-button on the Front Panel or
SUHVVWKH3RZHU3XVKEXWWRQRQWKH5HPRWH
Control. The MA/MAC6700 will go through a brief
startup intialization with the Front Panel Displays
indicating Power Guard is active, last used source and
volume setting. This is followed by the volume setting
indication starting at zero and then increasing to the
last used volume setting. Refer to figures 50, 51, 52
and 53. To switch OFF the MA/MAC6700, press the
STANDBY/ON Push-button on the Front Panel or the
OFF Push-button on the Remote Control.
Note: For an explanation of the Remote Control
Push-button functions, refer to pages 18 and 19.
ed, except the Meter Illumination and Digital Audio
Display settings of On or Off, which are the same for
all inputs.
Available Trim Functions
Trim Function MA6700
MA6700 or
MAC6700 with
TM2 Installed
MA6700 or
MAC6700 with
TM3 Installed
%DODQFH
33 3
%DVV
33 3
7UHEOH
33 3
Trim Level
33 3
7RQH&RQWURO
33 3
0RQR6WHUHR
33 3
3KRQR
33 3
'LVSOD\
33 3
'LJLWDO$XGLR
33 3
0HWHU%DFNOLJKW
33 3
7XQHU&RQWURO
ࡳ
33
Tuner Text
ࡳ
33
7XQHU%OHQG
ࡳ
3
ࡳ
The selection and adjustment of all Trim Functions
may be performed by first pressing the Front Panel
INPUT/TRIM Control. Then rotate the INPUT/TRIM
Control to select the desired Trim Function. This is
followed by rotating the VOLUME Control to make a
change/adjustment in the Trim Setting.
The Remote Control TRIM Push-Button together
with the LEVEL + / - Push-button may also be used.
Refer to figures 50 and 53.
After approximately 5 seconds the Display returns to
indicate the Source Selection and Volume Level.
How to Operate the MA/MAC6700
Figure 50
Figure 51
SOURCE: CD
15%
Figure 52
SOURCE: SERVER
30%