Owner's Manual

How to use the Remote
Control
The supplied
HR085
Remote Control is capable
of
directly controlling the functions
of
contemporary
•
Source Components connected to this
Mcintosh
Model via the Data
Port.
Notes:
1.
If
at any time the Mcintosh Model seems
unresponsive to HR085 Remote Control Com-
mands, press
the@
DEVICE Push-button to
select
IIJtlntoshfirst.
Trim
2.
For additional information on using the
HR085
Remote Control with the Mcintosh
Model, please refer to the
"How
to
Operate"
section
of
this Owner's Manual.
3.
For additional information on the Data
Port,
refer
to
the
"Connector
and
Cable"
and
"How
to
Connect"
sections
of
the Mcintosh Model
Owner's Manual.
Press the TRIM Push-button
until the desired Trim
function (Balance, Trim Level, etc.) appears on the
Mcintosh
Model Front Panel Display, then press the
LEVEL
Up or Down
Push-button
to adjust the Trim
setting.
Note:
Press
the TRIM Push-button to recall the last
Trim function selected. For additional informa-
tion on using the
Trim
Functions refer to "How
to
Operate"
section
of
the Mcintosh Model Owner's
Manual.
. Output
Selection
Press
the BLUE
(Setup)
Push-button followed by
the
AM
(Output
1)
or
FM
(Output
2)
Push-button, to
'control the Rear Panel Audio
OUTPUTS
1,
2
(ON
or
OFF)
and Power Control TRIG 1
I
TRIG 2. These
OUTPUTS provide signals to this Mcintosh Model
and/or other Mcintosh Models.
Note: Refer to
"SETUP"
section
of
the Mcintosh Model
Owner's Manual
for
additional information.
How to use the
HR085
Remote
Control
5