Owner's Manual
Table Of Contents
- Owners Manual
- Rear Panel Connections
- Tuner Module Installation and Connecting Antennas
- Connection Diagrams
- Remote Control Owners Manual
- Preferred Settings for Use with a PC
- Spec Sheet
- Warranty
How to use the Remote Control
The Remote Control is capable
of
performing most
Operating Functions for the Mcintosh SACD/CD Play-
• ers.
If
at any time the Mcintosh SACD/CD Player
• seems unresponsive to the desired Remote Control
Command, it may be necessary to select the color
of
the push-button nomenclature for the desired com-
mand. This is accomplished by first pressing the
SHIFT Push-button
to
select either white or gold, as
indicated by the LEOs, and then within 3 seconds
pressing,
or
in the case
of
some functions repeatedly
press, the desired command push-button.
Note: For additional information
on
using the HR086
Remote Control with the Mcintosh SACDICD
Player,
pl
ease refer to the "How to Operate"
section
of
this Owner's Manual.
Play
and
Pause
With a disc loaded, press the
PLAY•
Push-button to
start the disc playing. Press the
PLAY..,.
Push-button
a second time to temporarily stop disc playback at any
time (Pause).
To
resume playback press the
PLAY•
Push-button.
Note: The Play
and
Pause functions
have
been
combined
into the Play Push-button.
Stop
Press the
STOP•
Push-button to stop disc playback
,and return to displaying the table
of
contents
of
the
disc.
I
Numbered Push-buttons
Press l through 9 to directly access one
of
the first
nine Disc Tracks using the Front Panel Information
Display. For track numbers greater than
10,
press the
+10
Push-button followed by the 0-9 Push-button. For
example, to access Disc Track 23, press the
+10
Push-
button twice and then the
3 Push-button.
Reverse
and
Fast Foward
Press
the~
(Reverse)
or
..
(Fast Forward) Push-button
to start moving rapidly through a track on the disc.
When the desired location is reached release
the~
(Reverse)
or~
(Fast Forward) Push-button to resume
normal playback.
Back
and
Next
Press the
~
(Next) Push-button to move forward one
track
or
the
~
(Back) Push-button to move back to the
beginning
of
the current track playing. Also used to
review the Programmed Tracks from the disc on the
Front Panel Information Display, while in the Program
Mode.
Note:
If
the
~
(Back) Push-button is
pressed
during
playback
of
the
first
three
seconds
of
the
track, the
SA
CD
/
CD
will
start
playing
back the previous track
from
the beginning.
If
the Front Pane/Information
Display is indicating
time
, the display will momen-
tarily indicate the
track
number.
SACD
or
CD
Track
Selection
Press the DISC LAYER Push-button to select the
SACD
or
CD
Tracks from a hybrid disc for playback.
Display/Time
Press the DISPlay/TIME Push-button to access vari-
ous disc times. It is also used to return the Front Panel
Information Display to indicating time instead
of
text
information on a SACD Disc.
How to use the HR086 Remote Control
Menu/Text
Press the
MEN
U/
TEXT Push-button to select the vari-
ous text information on a SACD Disc such as Album,
Artist and Track Titles (disc dependent).
Repeat
Modes
Press the REPEAT Push-button to select either One
Track, All Tracks
or
cancel the Repeat Mode.
Clear
Press the CLEAR Push-button to erase a program
track(s).
7