Owner's Manual

10
• MB20 should be connected for Audio. When
successfully paired the Front Panel Button will
display as solid blue. Unsuccessful pairing will
display as solid white
You can use the Bluetooth menu of your connected
device to connect and disconnect the MB20.
Clearing and Reseng
To reset the MB20 and clear the pairing list:
• Press and hold the Front Panel Button for 10
seconds
• The LED of the Front Panel Button will blink,
pause and then double blink when reset. Release
the Button
• Pull out DC USB Power Connector from the
rear of MB20 for 10 seconds and then replace
Packing the MB20
When shipping the MB20, it is highly recommended that
the unit be packed as it was originally shipped to avoid
damage. For this reason, you may wish to save the original
box and packing material for your MB20. If you need
any of the packing material, you can contact McIntosh
Customer Service. Use only packing material that is in
good condition and replace any material that has seen
better days.