Owner's Manual

6
M B 2 0 B L U E T O O T H T R A N S C E I V E R
button is in the released position, the MB20 is in
Transmitter Mode. Pushing the RX/TX button
will toggle between these two modes.
RX/TX Buon MB20 Mode
In Bluetooth Receiver
Out Bluetooth Transmitter
MB20 Front View
Figure 2– MB20 Front View
Front Panel Button
White- Standby
Blue- Bluetooth Receiver Mode
Green- Bluetooth Transmitter Mode
Flashing (Blue or Green)- Discovery Mode
Power the MB20
Use the supplied AC/DC adapter with the
included USB cable to power the MB20. You
may be tempted to plug the USB cable into a
computer. This will not supply enough power for
the MB20 to function properly.
The DC input labeled DC 5V IN can be found
next to the antenna connection in “Figure 3–
MB20 Rear View” on page 7.
To allow the MB20 to properly reset when
powering o and on, please allow 5 to 10 seconds
between removing and re-inserting the power
cord.