Owner's Manual
8
Aach the Antenna
Attach the included Bluetooth Antenna to the ANT
Connection in the center of the rear panel of the MB20.
(See Figure 3 on page 7.) Tighten the brass nut at the
base of the Antenna until nger tight.
Transmier Mode
In the Transmitter Mode (TX), the MB20 will take a
signal from one of the inputs:
• Analog Balanced (XLR)
• Analog Unbalanced (RCA)
• Digital Coax
• Digital Optical
and send (transmit) the signal to a Bluetooth connected
device.
The Front Panel Button will glow Green in Transmitter
Mode.
To Power On, press and hold the Front Panel Button for
two seconds. The MB20 will automatically search for
the last paired device. After one minute, the MB20 enters
Discovery Mode. It will stay in Discovery Mode for 15
minutes.
The MB20 will pair a previously paired device while in
Discovery Mode or pair with a new device that is also in
Discovery Mode.
After 15 minutes in Discovery Mode, if no pairing
occurs, the MB20 will power o.
If the MB20 has not been previously paired (or the
pairing list has been erased), the unit will more quickly
(10 seconds) enter Discovery Mode.
Discovery Mode is indicated by a the Front Panel Button
ashing green (single blink on and o).
Since you may not be able to see a list of discoverable
Bluetooth Devices to choose from on the device you are
trying to connect to the MB20, it is helpful to not have
any other discoverable devices competing with the MB20
when trying to pair. The process of pairing will happen
automatically.
When the MB20 pairs with another device, the Front
Panel Button will be solid green (no longer blinking).
When connected, the MB20 will send input to the paired