Owner's Manual

19
Packing Instructions
Packing Instructions
In the event it is necessary to repack the equipment for
shipment, the equipment must be packed exactly as
shown below. It is very important that the four plastic
feet are attached to the bottom of the equipment. Two
#10 x 2-1/4 inch screws and washers must be used to
fasten the unit securely to the bottom pad and wood
skid. This will ensure the proper equipment location
on the bottom pad. Failure to do this will result in
shipping damage.
Use the original shipping carton and interior parts
only if they are all in good serviceable condition. If
DVKLSSLQJFDUWRQRUDQ\RIWKHLQWHULRUSDUWVDUH
needed, please call or write Customer Service Depart-
ment of McIntosh Laboratory. Refer to page 3. Please
see the Part List for the correct part numbers.
Quantity Part Number Description
1 03383600 Inner carton
1 03372500 Top pad
1 03430100 Bottom pad
1 03448000 Shipping skid
4 01793700 Foot
4 40015900 10-32 x 3/4 screw
4 40408000 #10 flat washer
1 03383800 Shipping carton
   )RDP3DGHQGFDSVLGHV
2 40120400 #10 x2-1/2 cap screw
2 40403300 #10 x 1-3/4 washer
2 01721800 Plastic foot spacer
B=>>/2
3<21/> 
7<A723
1/@B=<
A67>>7<5
1/@B=<
E==2A972
0=BB=;>/2
>:/AB714==B
A>/13@A 
>:/AB71
4==B"
C<7BE7B6
"433B=<
0=BB=;1=D3@
7<A723
1/@B=<
f  °
A1@3E 
f!"
E/A63@ 
! f!"
A1@3EE7B6
E/A63@"
7;>=@B/<B
@SOR/P]dS
7;>=@B/<B
@SOR/P]dS