Owner`s manual

Packing Instructions

Quantity Part Number Description

1 034052 Shipping carton top

1 034051 Shipping carton bottom

2 034054 Foam Pad (top and bottom)

2 034186 Foam Pad (front and rear)

2 034187 Foam Pad (sides)

1 034136 Inner carton top

1 034137 Inner carton bottom

1 034188 Foam Pad (inner carton)

1 034264 Shipping skid

4 101212 1/4 - 20x2-1/4 cap screw

4 104058 Flat washer

In the event it is necessary to repack the equipment for ship-

ment, the equipment must be packed exactly as shown be-

low. It is very important that the four plastic feet are at-

tached to the bottom of the equipment. Four 1/4 - 20 x 2-1/2

inch screws and washers must be used to fasten the unit se-

curely to the bottom pad and shipping skid. This will ensure

the proper equipment location on the bottom pad. Failure to

do this will result in shipping damage.

Use the original shipping carton and interior parts only if

they are all in good serviceable condition. If a shipping car-

ton or any of the interior part(s) are needed, please call or

write Customer Service Department of McIntosh Labora-

tory. Please see the Part List for the correct part numbers.