Manualshelf

Owner`s manual

ManualsBrandsMcIntosh ManualsAmplifierMC2301
15161718192021222324
23
Packing Instructions
Packing Instructions
Quantity Part Number Description
1 034105 Shipping carton top
1 034104 Shipping carton bottom
2 034439 Foam Pad (top and bottom)
3 034441 Foam Ring
2 034440 Foam Inserts (for protecting
the Tubes during shipping)
1 0410900 Warning Sheet
4 400159 10-32 x 3/4 inch screw
4 018445 Feet
In the event it is necessary to repack the equipment
for shipment, the equipment must be packed exactly
as shown below. It is very important that the four feet
are attached to the bottom of the equipment. This will
ensure the proper equipment location on the bottom
foam pad. Failure to do this will result in shipping
damage.
To protect the tubes during shippment, the two
Foam Inserts removed from the MC2301 need to be
re-inserted. Follow the unpacking instructions on
pages 3-4 in the reverse order.
Use the original shipping carton and interior parts
only if they are all in good serviceable condition. If
a shipping carton or any of the interior part(s) are
needed, please call or write Customer Service Depart-
ment of McIntosh Laboratory, refer to page 3. Please
see the Part List for the correct part numbers.