Owner`s manual

Display Brightness

The Front Panel Alphanumeric DISPLAY Brightness may

be varied from the default setting of MAXIMUM (Bright)

to MINIMUM (Dim). Follow the steps below for reducing

the Display Brightness. Refer to figures 3 and 6.

1. Press the SETUP Push-button two times to access the

DISPLAY Mode in Setup.

2. Rotate the LEVEL Control Counterclockwise until the

Front Panel Alphanumeric Display Brightness is re-

duced to the desired setting. Refer to figure 7.

3. Press the SETUP Push-button two times to exit the

Setup Mode. The LED above the SETUP Push-button

will be extinguished.

Setup

Figure 6

Figure 7

Re-Title Inputs

The MDA1000 has seven Digital Audio Inputs with as-

signed titles that will allow for immediate connection, op-

eration and enjoyment. These inputs may be renamed to

match the digital components in your system. The following

example will illustrate how to rename the 1 COAXIAL In-

put to 1 CD1. When the Input Selector is rotated to select

what was originally the 1 COAXIAL Input, 1 CD1 will

now appear on the Front Panel Alphanumeric Display.

Note: The New Input Titles that are available for all the

Inputs include CD1, CD2, CD3, DVD1, DVD2,

DVD3, LD, VCR, SAT, AUX1 and AUX2.

1. Press the SETUP Push-button three times to access the

Re-Title Mode in Setup. Refer to figures 3.

2. Rotate the INPUT Control Clockwise to select the de-

sired Digital Audio Input to be Re-Titled. Refer to fig-

ure 8.

3. Rotate the LEVEL Control Clockwise until the Front

Panel Alphanumeric Display indicates the desired input

name. Refer to figure 9.

Figure 8

Figure 9

4. To Re-Title additional input(s) repeat steps 2 and 3.

5. Press the SETUP Push-button to exit the Setup Mode.

The LED above the SETUP Push-button will be extin-

guished.