Owner`s manual

28
The MEN220 has built in the ability to improve the
sound quality of your Audio System. However, it does
require the RoomPerfect portion of the Setup Mode
be performed in order to benefit from the potential
improvements. Please refer to “How to Operate the
Setup Mode” on page 17 and “RoomPerfect” starting
on page 24.
Power On
Press the STANDBY/ON Push-button on the Front
Panel or the (Power) Push-button on the Remote
Control. Refer to figures 101 and 113. The MEN220
will go through a brief startup initialization with the
Front Panel Information Display indicating the audio
is muted. Refer to figure 113.
The Front Panel Information Display will then indi-
cate the current RoomPerfect Focus selection (Focus
1 thru Focus 8) or “Bypass” if the RoomPerfect Mode
has been switched Off. Refer to figures 102 and 103.
How to Operate
Global Mode
Press the GLOBAL MODE Push-button to activate
the RoomPerfect Global Setting. Refer to figure 104.
The Global Setting is a combination room perfor-
mance measurements including Focus and additional
locations in the room. Use the Global Mode when the
listening will be performed in a variety of different
locations or when more than one person will be listen-
ing in the room at the same time.
Figure 101
RoomPerfect: Focus 1
Voicing 0:Neutral
Focus Mode
Press the FOCUS MODE Push-button to activate
the RoomPerfect Focus Setting. Refer to figure 102.
Continued presses of the FOCUS MODE Push-button
will allow selection of seven possible additional room
measurement Focus locations which were performed
during the RoomPerfect Setup. Refer to figure 103.
Bypass Mode
Press the BYPASS MODE Push-button to deactivate
the RoomPerfect Room Corrections. This includes
both the Focus and Global settings.
Menu
Press the MENU Push-button to enter the Setup
Mode. Refer to figure 104 and to MEN220 Setup
Section of this Owner’s Manual starting on page 17.
The MENU Push-button may also be used for return-
ing to the previous menu and repeated presses will
exit out of the Setup Mode.
Voicing
Press the VOICING Push-button to select one of 7
different preset equalization curves for altering the
sound of the program material and/or your listening
mood. Refer to figures 105 thru 112. Also refer to the
Equalization Curves for all the presets that are located
on the separate folded sheet “Mc3A”.
Figure 100
RoomPerfect: Muted
Voicing 0:Neutral
Figure 102
RoomPerfect: Focus 1
Voicing 0:Neutral
RoomPerfect:Global
Voicing 0:Neutral
Figure 104
Figure 103
RoomPerfect:Bypass
Voicing 0:Neutral
Figure 103
RoomPerfect: Focus 2
Voicing 0:Neutral
Figure 104
MEN220 Setup Menu
< RoomPerfect >