Owner`s manual

16
IR Sensor receives
commands from a
Remote Control
STANDBY/ON Push-button with
indicator switches the MHA100
ON or OFF (Standby) and resets
the microprocessors
Connection for dynamic
type headphones, for
private listening
Meter indicates the
Right Channel Output
of the amplifier
LED indicates when the Left
Channel Amplifier POWER
GUARD circuit activates
Meter indicates the
Left Channel Output
of the amplifier
LED indicates when the Right
Channel Amplifier POWER
GUARD circuit activates
INFORMATION DISPLAY indicates
the Sources, Volume, other Audio
Settings, Operational Functions and
Setup Mode Settings
VOLUME Control allows
adjustment of the listening
level for both channels.
Also used to activate the
HXD and Profiles Modes
along with selecting a given
Profile.
PROFILE Control allows
selection of stored Profile
Settings and used for
various Profile Modes
INPUT Control allows
the selection of sources
for listening and to select
different Setup Functions.
Also used to activate the
Trim and Setup Modes.
OUTPUT Control allows the
selection of either Headphones
(various impedances) or Loud-
speakers. When in Setup Mode
used for changing the various
function settings.
Indicates the Dynamic Crossfield
circuitry is active when illuminated