Owner's Manual

Packing Instructions

In the event it is necessary to repack the equipment for

shipment, the equipment must be packed exactly as

shown below. It is very important that the four plastic

feet are attached to the bottom of the equipment. This

will ensure the proper equipment location on the

bottom pad. Failure to do this will result in shipping

damage.

Use the original shipping carton and interior parts

only if they are all in good serviceable condition.

If a shipping carton or any of the interior part(s)

are needed, please call or write Customer Service

Department of McIntosh Laboratory. Refer to page 2.

Please see the Part List for the correct part numbers.

Quantity Part Number Description

1 033838 Shipping carton only

2 033837 Pad Foam End cap

1 033836 Inside carton only

1 033725 Top pad

1 034576 Bottom pad

2 034446 Foam plug

4 017937 Plastic foot

4 400159 #10-32 x 3/4” screw

4 404080 #10 Flat washer