Specifications

FOCUS
Figure 6. VERTICAL POSITION Control.
position the indicator trace can be easily
moved to the correct vertical position. For
Multipath display the trace is positioned at
the bottom reference point (point A). For
audio indications the trace is positioned at
the center reference point (point B). This
shift in position occurs automatically as the
Scope Test Control is turned. An internal
adjustment labeled "L & R position" is
factory preset but can be read justed if needed.
INTENSITY
Figure 7. INTENSITY Control.
This control adjusts the brightness of the
indicator trace. After the Intensity control
has been turned, the Focus control may have
to be readjusted for the best possible in-
dicator trace.
Figure 8. FOCUS Control
This control adjusts the sharpness and
clarity of the indicator trace. Focus is easiest
with the Scope Test switch in TEST position.
Figure 9. ON-OFF SWITCH PILOT LIGHT
BACK PANEL INFORMATION
Figure 10. MI-2 FM MULTIPATH/TUNING INDICATOR
Back Panel.
5