Owner`s manual

25
Please Wait” will appear. Refer to figures 22 and
23. After a brief moment, Figure 24 will appear,
select Yes and figure 25 appears briefly.
4. At this time place the microphone in the focus
location with the front of the microphone pointing
towards the loudspeakers (center location between
the Left and Right Loudspeakers). The height of
the microphone should be at ear level. Refer to
figure 26.
Note: The Microphone Stand Boom Adaptor allows
the microphone to be placed over objects
such as a chair or table.
5. Press the SELECT Push-button and the “Volume
Calibration measuring” will appear. Refer to
figure 27. The MX151 will send out to each of the
loudspeakers, one at a time, a test tone to obtain
a measurement level making sure it is above
the backround noise level in your room. Several
minutes after testing, figure 28 (on page 26) will
appear on-screen. Select “Save Current” and press
the SELECT Push-button. When figure 29 (on
page 26) appears On-Screen, select continue and
press the SELECT Push-button.
Speaker and Room Setup 
Speaker Conguration
RoomPerfect
Level Offsets
Distance Settings
Back

Figure 21
RoomPerfect 
Guided Setup
Back

Figure 22
Conrm delete 
Delete all data in
RoomPerfect?
Yes
No

Figure 24
Starting Guided Setup 
Please Wait...

Figure 23
Installer Menu 
Speaker and Room Setup
Source Setup
Audio Processing Setup
Zone B Setup
System Setup
Device Management
Exit

Figure 20
Figure 26
Connect Microphone 
Connect and place mic
in Focus Position
Ok
Abort

Please Wait... 
Please Wait...

Figure 25
Setup Mode, con’t