Owner`s manual

INSTALLER MENU SUB MENU SELECTION OPTION(S) DESCRIPTION SETUP SHEET NO.

Audio Processing Setup

Advanced Audio Setup

RP Bypass No, Yes Bypasses the audio signal around RoomPerfect

Correction; Bypass is available as a Trim Func-

tion and as an option in the User Menu

Lipsync 0-400ms Delays the audio signal to be in synchronization

with the video signal

HDMI Audio Out Silent, Off, On Silent-mode sends a zero bit audio stream to

the TV/Monitor, Off-mode sends no audio bit

stream, On-passes the source component’s audio

bit stream to the TV/Monitor

Mch. AD LFE Gain 0dB, +10dB Affects the Analog Multichannel Sub Input only,

corrects reduction in output level from some

DVD Players

Zone B Setup

Power Independent, Follow Zone A Zone B switches On/Off independently or

switches On/Off when Zone A switches On/Off

Volume Mode User, Fixed, Wakeup Retains the last volume setting, allows for a

xed volume setting (used to provide an output

for recording purposes), Zone B wakes up to the

same volume setting when switched On

Set Volume 0-99% Used to set Zone B Output Level when Zone B

Volume Mode is set to Fixed or Wakeup

Video Output Zone B, Independent, Zone A Zone B Input Control select video source, ex-

ternal control (via RS232 connection) can select

a different video source than the selected audio

source, same video source as selected for Zone

Max volume 0-99% Zone B maximum volume 5

Startup Screen Use last, or any currently

available Input

Allows which input Zone B wakes up to 5

Edit Zone B Sources

Name: a-z, A-Z, 0-9, plus additional

characters

Customize the Input Source Name 5

Video In None, Component 1-5 Zone B component video input source 5

Setup Mode, con’t