McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 www.mcintoshlabs.
WARNING - TO REDUCE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. To prevent the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. IMPORTANT SAFETY INSTRUCTIONS! PLEASE READ THEM BEFORE OPERATING THIS EQUIPMENT. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6.
RS100 Quick Start, for Apple Powered Devices STEP 1 STEP 2 REMOVE UNIT FROM CARTON ACCESSORY PACK REMOVE PROTECTIVE COVER AND OPEN ACCESSORY PACK REMOVE AC CORD STEP 5 DOWNLOAD AND INSTALL THE PLAY-FI APP TO YOUR APPLE POWERED MOBILE DEVICE COVER MOBILE DEVICE The Play-Fi App for Music Streaming and Remote Operation of the RS100 is available at the Web Site for download free of charge: RS100 REMOVE PROTECTIVE PLASTIC FILM FROM THE FRONT PANEL STEP 3 CONNECT THE SUPPLIED AC CORD AC OUTLET WHEN
STEP 6 STEP 7 ESTABLISH CONNECTION WITH A WIRELESS ROUTER ESTABLISH COMMUNICATIONS WITH THE MOBILE DEVICE, SETTING UP THE PLAY-FI APP FOR A SINGLE RS100 AND EACH RS100 OF A STEREO PAIR NOTE: If your Apple Powered Mobile Device is currently Wi-Fi Connected to your Wireless Router, proceed to STEP 7.
RS100 Quick Start for Apple Powered Devices, con’t STEP 7, con’t 11th - SELECT “Your Network” STEP 8 Play-Fi “Set-up” Connecting to Your Router 12th - Enter your 13th - SELECT Network Password if required 14th - SELECT the 15th - SELECT “Location Name” name of the room where the RS100 is located NOTE: The “WI-FI/NET” LED indicator will change from slowly pulsing On/ Off to On all the time.
RS100 Quick Start for Apple Powered Devices, con’t STEP 8, con’t ESTABLISH COMMUNICATIONS WITH THE MOBILE DEVICE, SETTING UP THE PLAY-FI APP FOR A STEREO PAIR, con’t 24th - Select the 25th - Enter a Name “Right Channel Loudspeaker” 27th - Select “MASTER BEDROOM 12” 6 26th - Select “DONE” for the just created Stereo Pair of Loudspeakers for the just created Stereo Pair of Loudspeakers 28th - Select “MUSIC” to start playback of desired music
RS100 Quick Start for Android Powered Devices, con’t STEP 10 STEP 9 ESTABLISH CONNECTION WITH A WIRELESS ROUTER NOTE: If your Android Powered Mobile Device is currently Wi-Fi Connected to your Wireless Router, proceed to STEP 11.
ESTABLISH COMMUNICATIONS WITH THE RS100 STEP 11 1st - PRESS IN AND RELEASE TO POWER ON A SINGLE RS100 2nd - GREEN LED INDICATES WHEN THE RS100 IS IN THE SETUP MODE, FOR ESTABLISHING WIRELESS OR WIRED NETWORK CONNECTIONS Searching for Play-Fi Devices 3rd - SELECT “Play-Fi APP” 5th - ENTER “Network (Router) Password” 8 6th - SELECT “Next” 7th - SELECT the name of the room where the RS100 is located 4th - SELECT “Set-up New Device” NOTE: Proceed with “Set-up new Device” after the “WI-FI/NET” LED indica
RS100 Quick Start for Android Powered Devices, con’t STEP 12 ESTABLISH COMMUNICATIONS WITH THE MOBILE DEVICE, SETTING UP THE PLAY-FI APP FOR A STEREO PAIR While a single RS100 may be used in a room for a Monaural Sound Stage, most RS100s will be used in pairs to produce a Stereo Sound Stage. When RS100s are going to be used as a Stereo Pair in a room, some additional setup procedures are required.
Introduction, Performance Features, Dimensions, Installation, Rear Panel Connections and Connecting to External Components Introduction Dimensions Rear Panel Connections Connecting to External Components Now you can take advantage of traditional McIntosh standards of excellence in the RS100 Wireless Loudspeaker System. The RS100 provides superior spaciousness sound reproduction with unusual sound stage depth. The McIntosh Sound is “The Sound of the Music Itself.
Front Panel Controls, Display and How to Operate the RS100 How to Operate the RS100 STANDBY/ON Control switches the RS100 ON or OFF by pressing in the Control; rotate the Input Control to select the AUX Input for listening Meter indicates the Output of the Amplifier and other operational changes Rotate the Volume Control to increase or decrease the listening level, press momentarily in the Volume Control to Mute or Un-Mute the sound.
6SHFL¿FDWLRQV DQG 3DFNLQJ ,QVWUXFWLRQV Audio Specifications General Specifications Packing Instructions Aux Iput Sensitivity 200mV Power Requirements 100-240 Volts, 50/60Hz at 60 Watts Standby: Less than 0.5 watt In the event it is necessary to repack the equipment for shipment, the equipment must be packed exactly as shown below. Failure to do this will result in shipping damage. Use the original shipping carton and interior parts only if they are all in good serviceable condition.
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, NY 13903 www.mcintoshlabs.com The continuous improvement of its products is the policy of McIntosh Laboratory Incorporated who reserve the right to improve design without notice. The RS100 is designed to employ non-McIntosh-provided services (including but not limited to Play-Fi® and Wi-Fi®), some of which require separate customer subscriptions and some of which do not, as part of the Products’ functionality.
RS100 wireless loudspeaker ■ The RS100 wireless speaker allows you to easily add streaming music to any room you want. Just connect it to your Wi-Fi network and then stream from your mobile device. Auxiliary input available for non-streaming use. ■ Features DTS Play-Fi® technology to give you the freedom and flexibility to wirelessly play your music at home anyway you want over your existing Wi-Fi network. ■ Start with one speaker and add more over time.
RS100 wireless loudspeaker System Type: 2-way, rear ported wireless bookshelf speaker with high gloss black finish Grill: Magnetically attached black cloth Power Handling: 60 Watts Woofer/Midrange: One 4” long throw under hung voice coil in a ½” thick top plate, copper cap for distortion reduction Tweeter: One ¾” Titanium dome, magnetic fluid cooled Response: 55Hz to 20kHz (active high pass) Sensitivity: 85dB (1w / 1m) Crossover Frequency: 2,500Hz Inputs: 1 Unbalanced Analog Outputs: 1 Unbalanced Analog
HOME ELECTRONICS THREE YEAR LIMITED WARRANTY W elcome to the family of McIntosh owners. This is the Warranty for your new McIntosh Home Electronic Product (the “Product”). Your Product has been designed to give many years of trouble-free performance. Nonetheless, failures do sometimes occur even with equipment as well-built as McIntosh’s.
Scope and Duration of Warranty Parts and Occurrences that are not Covered by the Warranty Subject to the terms and conditions stated below, McIntosh Laboratory, Inc. (“McIntosh”) warrants to the original owner that this Product shall be free from defects in workmanship or materials for a term of three (3) years from the date when it was purchased from an Authorized McIntosh Dealer.
