McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 RS150 Wireless Loudspeaker System Owner’s Manual Quick Start is on page 4 Phone: 607-723-3512 www.mcintoshlabs.
Safety First This product complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: It is a smart idea to read all the enclosed RS150 SAFETY INFORMATION included in separate documents; even if you already know this stuff, you can’t be too safe. (1) this product may not cause harmful interference, and (2) this product must accept any interference received, including interference that may cause undesired operation.
Table of Contents Safety First �������������������������������������������������������������2 FCC Information (For US Customers) ������������������2 IC Information (Canadian Customers) ������������������2 Thank you from all of us at McIntosh �������������������3 Make a Note �����������������������������������������������������������3 Trademark and License Information ���������������������4 Quick Start (Bluetooth) �����������������������������������������4 More Connections �����������������������������������
Trademark and License Information TIDAL is the first global music streaming service with high fidelity sound, hi-def video quality, along with expertly curated playlists and original content — making it a trusted source for music and culture. The McIntosh RS150 incorporates copyright protected technology that is protected by U.S. patents and other intellectual property rights.
More Connections AirPlay 2 AirPlay 2 is an Apple technology designed to control home audio systems and speakers in any room – with a tap or by simply asking Siri – right from iPhone, iPad, HomePod or Apple TV. • • Select the RS150 The RS150 will be added to your network Ethernet For a wired connection to your network, use an Ethernet cable to connect the RS150 to your router. See Figure 3. To control this AirPlay 2-enabled speaker, iOS 11.4 or later is required.
Note About Initial Network Connection When your RS150 connects to your network for the first time, it will automatically look for the latest software update. If available, the RS150 will install the newest version. When updating, the Red LED below the Right Knob will blink twice, pause and repeat. You may adjust how future updates are handled. See “UPDATE Menu” on page 12. Roon When connected to your network, the RS150 will be available as a Zone for your Roon server. (If you have a Roon server.
Front View Labeled Installing the Grille The RS150’s Grille can be installed by lining up the eight plastic pegs on the back of the Grille with the eight holes framing the speakers of the RS150. Gently push with even pressure to install and pull straight away from the front to remove the Grille. See Figure 5 below. Note that the Grille has a top and bottom. The bottom has a lip that extends further from the pegs than the top does.
The Knobs and LEDs on the Front The Right Knob The Right Knob is primarily the Volume and Power Knob.
Rear View Labeled Rear Connections Ethernet Port The Ethernet Port connects your RS150 to your network’s router using a standard CAT5, CAT5E or CAT6 cable with an RJ45 connector. Using a wired connection is one way to access the RS150’s setup via a browser. For more information, see “The Browser Interface” on page 10. AC Connector Use the supplied AC Power Cord to connect the RS150 to a live AC outlet.
The Browser Interface To view the RS150’s browser interface, you will need its IP address. There are several ways to find a device’s IP address. For instance, you can use IP scanner software. Here is one way with out additional software. To find the RS150’s IP address: With the RS150 connected to your network with a wired or wireless connection: • Type the IP address of your router into the address bar of a browser (often 192.168.1.1) • Enter the router’s Username and password.
automatically connect to Wi-Fi when the ethernet cable is unplugged provided the Wireless connection has previously been setup. Selecting Wired for Network Type will limit the RS150 network connection to the ethernet port connection. Select Wireless to setup a Wi-Fi network or to restrict the network connection to Wi-Fi.
Figure 9– UPDATE submenu UPDATE Menu The UPDATE menu allows you to reset settings to the factory defaults as well as update your RS150. To restore Factory settings, select the “Start Factory Reset” button. Done. Note that you will lose your Wi-Fi settings. An alternative method for Factory Reset, is to Press and Hold the Left and Right Knobs for 10 seconds. Update Method allows you to set how the RS150 updates its firmware.
Re-packing the RS150 When shipping the RS150, it is highly recommended that the unit be packed as it was originally shipped to avoid damage. Failure to properly pack the unit will likely result in damage. If you need any of the packing material, you can contact McIntosh Customer Service.
Dimensions 7.68” 19.5cm 14.37” 36.5cm NET VOLUME BT -40 -30 -20 -10 0 dB OUTPUT LEVEL PUSH BT PAIR PUSH POWER / MUTE RS150 8.62” 21.9cm Figure 11– Dimensions 14 8.9” 22.
Technical Specifications Power Output 120W: 30W Tweeter, 90W Woofer Weight 18.5 pounds (8.4kg) net 24.0 pounds (10.
The continuous improvement of its products is the policy of McIntosh Laboratory Incorporated who reserve the right to improve design without notice. The RS150 is designed to employ non-McIntosh-provided services some of which require separate customer subscriptions and some of which do not, as part of the Product’s functionality.
McINTOSH RS150 QUICK START CONNECTION GUIDE Getting Started This guide will help you start listening to music through your RS150 as quickly as possible while you peruse the owner's manual and complete your setup. You can do this by connecting a device directly to the RS150 using Bluetooth, or by using a separate device to connect the RS150 to a home network. Consult the owner's manual to ensure your device meets the minimum requirements.
McINTOSH RS150 QUICK START CONNECTION GUIDE Connect to a Home Network (cont.) Using a Direct Wireless Connection Note: This connection method temporarily creates a direct connection between your external device and the RS150 using Wi-FI communication in order to permanently configure the RS150 to connect to the network. 1. Open your other device's Wi-Fi networks list. 2. Locate the RS150 in the list of available networks. 3. Select the RS150 network to connect to it. 4.
RS150 wireless loudspeaker ■ ■ ■ ■ ■ ■ ■ ■ The RS150 Wireless Loudspeaker is an easy-to-use wireless speaker, that while relatively compact, still delivers a larger-than-life premium home audio performance. Includes a variety of built-in casting technologies: Spotify® Connect, TIDAL® Connect, Apple® AirPlay® 2, Bluetooth®, Chromecast, and Roon, letting you easily stream to the RS150 from your favorite streaming apps on your smart devices. Does not require any dedicated control app.
RS150 wireless loudspeaker Wireless Connectivity: Apple AirPlay 2 Bluetooth 5.0 A2DP with support for AAC, aptX HD and aptX Low Latency Chromecast Roon Ready Spotify Connect TIDAL Connect Wi-Fi 802.11 a, b, g, n, ac 2.4/5GHz Wired Connectivity: (1) Ethernet Frequency Response: 48Hz - 20kHz Grille: Black knit cloth Driver Complement: (1) 20mm Titanium Dome Fluid-filled Tweeter (1) 5-1/4” x 6” Long Throw Woofer Crossover Frequency: 2,000Hz Overall Dimensions (W x H x D): 7-3/4” (19.5cm) x 14-1/2” (36.
