Owner`s manual

5
Introduction and Performance Features
Performance Features
• Patented LD/HP
®
Technology
The McIntosh Low Frequency Loudspeaker Elements
feature the patented LD/HP Magnetic Circuit Design.
This design, when compared to conventional Loud-
speaker Elements, reduces distortion significantly. It
also increases power handling and efficiency.
• Neodymium-Iron-Boron Alloy Magnets
The 8 two inch Midranges and 5 three-quarter inch
Dome Tweeters all use this Alloy. The Neodymium-
Iron-Boron Alloy has the highest flux density per
unit of volume. This allows for a smaller physical size
driver and thus closer driver to driver placement for
improved dispersion.
• Low Harmonic and Intermodulation Distortion
The XCS200 Loudspeaker System is capable of repro-
ducing the full dynamic range of a symphony orches-
tra with very low audible distortion of any kind.
• High Power Handling
The Loudspeaker Elements and Crossover Compo-
nents of the XCS200 are all chosen for use with ampli-
fiers up to 600 watts.
• Superior Imaging
Locating the Tweeters between the two rows of
Midranges generates a symmetrical horizontal polar
response for superior imaging.
• Versatile Operation and Placement
The XCS200 Loudspeaker System is designed for use
in a multichannel system including the Front Channels
(Left, Center and Right) or Surround Channels (Side
and Back).
• Stabilizer Bar and Wall Mounting Brackets
The built-in Stabilizer Bar allows changing the
vertical angle up to ± 5.5 degrees. On Wall Mount-
ing Brackets are supplied for both Flush and Angled
mounting of the XCS200.
• Optional In-Wall Mounting Kit
The optional In-Wall Mounting Kit is supplied with a
paintable Metal Grille for both horizontal and vertical
In-Wall Mounting Positions. Contact your McIntosh
Dealer for additional information.
• Multiple Connections
In addition to the regular connections, the XCS200
Loudspeaker System provides separate connections
for Bi-Amplification and Tri-Amplification hookups,
as well as Bi-Wiring and Tri-Wiring.
• Extruded Enclosure
The Loudspeaker Enclosure is extruded thick alumi-
num construction with non-parallel internal sides to
reduce internal standing waves. The enclosure has a
durable textured black finish.
• Gold Plated Input Connectors
The XCS200 Input Connectors are gold plated for
superior corrosion resistance and high electrical con-
ductivity.