User's Manual

12
When the memory is full with 50 messages, is displayed on the right lower corner in the
Message initial screen(Fig. 3).
2) Easy Way to Change Alert Mode
You can easily change the incoming alert mode by pressing • or • twice fast.
From the Message initial screen (Fig. 3), press • or • twice fast to change.
The alert mode is changed to the following steps.
[ Audible alert # Silence # Audible alert after vibration # Vibrating alert ]
As you press • or • twice fast, the indicators representing the incoming alert mode are
changed accordingly.
3) Out of Range
If the pager are outside your paging coverage area, disappears.
As long as is not displayed, the pager can not receive messages.
4) Battery Gauge
A battery gauge indicator on the upper corner keeps you informed of the battery level.
5) Automatic Message Deletion
If all the 50 message slots are full, the oldest, unlocked and previously read message is
automatically deleted when a new message is received.
When the message memory is full, is displayed.
Note : To prevent specific messages from being deleted, lock them or move to NoteBook.
6) Lamp On/Off
As long as the screen is not left blank, press for 1 second to turn lamp on and press
again for a second.