Installation manual

Page 4

Display

The ‘standby screen’ is shown here.

This is the display for normal radio operation.

Latitude

Longitude

are shown here as 'standard' position

values. If ‘enhanced’ position is selected

(see page 42 'Setting Profiles:

Position Information')

then position is shown to the

nearest second ("). Example: 50°56'23" N.

F1 radio is currently tuned to Channel 11.

‘at: HH:MM’ displays the vessel local time

in 24 hour format.

 indicates that 1 or more DSC message(s)

has/have been received and not yet read.

Alternatively, with no unread messages

this area of the screen may display the text

‘Off:+01:00’ (for example) if the local time is

offset from UTC (Co-ordinated Universal Time),

or simply UTC if local time and UTC are identical.

Menu and Pos are indications of Action key function.

In the standby screen, the left action key function indicator

is associated with the button to the lower left corner of the display,

and the right action key function indicator with the lower right button

(see example above) so if the user pushes the button labelled

Pos the display will change to the Position screen, and the Pos

key will have a different function, it will become the Exit key.

Standby screen showing offset time

value Off:+hh:mm.

Where no offset exists the

text UTC is displayed.

In either case no unread messages

exist, else the text is replaced by .

50°56'N at:08:40

001°34'E



Pos

50°56'N at:08:40

001°34'E Off:+01:00

Pos

NOTE: if the ‘Auto Dim’ feature (see 'Display and Keyboard Dimming : Auto

Dim') is enabled, the display will dim after 5 minutes of keypad inactivity. Any

single key press in the auto-dimmed state will brighten the display, (but not

perform other any action) so an additional key press is required to initiate the

desired action.