Installation manual

Page 5
How to Access F1 Radio Features Using the Menu
The F1 radio is easy to operate. Many functions are available from simple front
panel controls, but most features are accessible from the easy to navigate ‘menu’
(series of linked software controls).
The main menu is accessible from standby
mode. The standby display (or ‘screen’) is
shown here.
The Menu action key (associated with the
Menu label on the standby screen) must be pressed to
allow access to menus. The menu comprises
nested levels of screens providing options to select
or setup various features of the radio.
As the menus are navigated the action key labels
change, dependent on the options available at each
level of menu.
At its most basic, navigation of menus
requires selection of menu mode or level
(normally left Action key), examination of
available options (via the Scroll keys),
followed by selection of the desired
option (left Action key again).
Once the desired option has been selected, or the
user decides not to effect a change, then the
right Action key (normally labelled Back or Exit)
is pressed to return to previous menu levels, and
ultimately to the standby screen.
This example shows the effect of pressing Menu,
followed by a single press of the Scroll Up key.
Subsequently, pressing the Left Action key
(now labelled Select) will allow the user to
access a menu sub-level called Profiles (radio
settings), and the first sub-menu option is
Scan dwell time.
If you want to change Scan Dwell Time press
the Select action key, otherwise use the
scroll keys to list other menu options, then press
Select to change the desired option settings.
If you do not want to change anything at this menu level, press the Back key
(Right Action key).
The menu hierarchy (or structure) is described in more detail in ‘Appendix B:
Menu Hierarchy’ section of this manual.
50°56'N at:08:40
001°34'E UTC
Menu
16
Pos
Profiles 
Select Exit
Profiles
Scan dwell time 
Select Back