Installation manual

Page 7
To move to another line press a scroll key. Time (hh:mm) must now be entered in
the Pos at:−−:−− blank area. If time is not entered (and the Done Action-key is
pressed) the message Invalid Time will appear for 2 seconds. Note that entering a
time via the Position Update screen will not update the radio clock time
3
. It is a
static time, which should be updated every 4 hours as a minimum, where no GPS
data source is available. Clock time (and date) is set in ‘Profiles’
4
(accessible via the Menu Action key).
3
The radio internal clock operates only when power is available to the radio, and must be manually set, or the clock sets
itself using a GPS data source.
4
Please refer to the 'Setting Profiles' section of this manual for details on setting clock time.