Installation manual

Page 19
5. Use the numeric keys to enter the MMSI,
and Clear to backspace and correct any error.
Ensure 9 digits are entered, then press
Select.
6. The radio recognises the '00' prefix as a Coast
Station call; the display changes to
Coast station Call and you are prompted to
insert a position
(to be sent with the transmission).
If you do not want to include your position in
the message, use the scroll keys to change
the prompt from ‘Yes’ to ‘No’.
7. The message is now ready to be sent.
The left action key has now changed from
Select to Send.
Press Send.
8. The message is now transmitted and the
radio display now shows
Wait for Acknowledge.
The radio will remain on this state waiting for
acknowledge for 5 minutes or until Reset is
pressed.
If acknowledgement is received, the calling
station acknowledge message includes the
channel for verbal communication. The F1
radio will then switch to that channel. In this
example the Coast Station selected channel
22.
Called stn MMSI
MMSI:00232144
Select Clear
(
when MMSI entered
)
Coast station Call
Call stn:002321447
Insert position
Yes
Select Back
Coast station Call
Call stn:002321447
Wait for Acknowledge
Reset Back
Coast station Call
Call stn:002321447
Send Back
50°56'N at:08:41
001°34'E UTC
Menu
22
Pos