Installation manual

Page 26
Creating and Editing a Scan Program
To Create (and Edit) a Scan Program:
1. Press Menu action key to display top level
menu selection; Send DSC messages.
2. Use the Scroll keys to display the
Channel scanning menu.
3. Press Select.
4. The first option displayed in the Channel
scanning menu is Run scan program.
Use the Scroll keys to display the
Edit scan program menu.
Press Select.
5. The first option displayed in the
Edit scan program menu is Scan: ALL.
Use the scroll keys to highlight a Scan
Program to create or edit.
(Scan programs 01 to 09 are available).
Press Select.
6. Scan Program 01 is used in this
example.
Press Select to begin editing the program.
7. Edit screen for Scan Program 01 is
displayed. No channels entries have been
found in this Scan program so the first channel
entry (number 1, of a possible 30 entries) is
shown with the channel number field displayed
as xxx (blank entry).
Send DSC Messages 
Select Exit
Channel scanning 
Select
E
xit
50°56'N at:08:41
001°34'E UTC
Menu
16
Pos
Channel scanning
Run scan program 
Select Back
Edit scan program
Scan:
ALL
Select Back
Edit scan program
Scan:
01
Select Back
Scan: 01 edit
1:
xxx
Store Delete