Installation manual

Page 38

Erasing a Directory Entry

To Erase a Directory Entry:

1. Press Menu, scroll to Directory,

and press Select.

2. Scroll to Erase and press Select.

3. The display shows the first Station Name

entry (list in alphabetic order) and MMSI

number. Scroll through the list of names (or

enter an initial character using the character

entry method described in ‘Adding a

Directory Entry’, steps 4 and 5) to find the

desired entry.

4. Press Erase. The display will confirm that

the entry has been erased.

Search for a Directory Entry

To Search for a Directory Entry:

1. Press Menu, scroll to Directory,

and press Select.

2. Search is the first displayed Directory

option. Press Select.

3. The display shows the first Station Name

entry (list in alphabetic order) and MMSI

number. Scroll through the list of names (or

enter the first character using the character

entry method described in ‘Adding a Directory

Entry’, steps 4 and 5) to find the desired entry, (wait until the first name starting with

that letter is displayed, then the other names which also start with the same letter

can then be accessed by scrolling. This method is much faster for finding names

towards the end of the alphabet, particularly if the list is full).

Individual or Group Calls Using the Directory

To Transmit DSC Calls Using a Station or Group Names from the Directory:

Please refer to the ‘Basic DSC Operations: Transmitting an Individual DSC Call

Using Called Station Name’ section, page 15. The Group Stations are accessed,

using the directory, in the same way as Individual Stations.

Directory:Erase

Stn name:

SeaMist

Stn MMSI:

Erase Back